Connect online ordering, business management, prepress and print production around the way your shop works. Explore Durst’s modular Open Software Initiative portfolio and build a workflow around the systems you use.
Durst Smart Factory is a portfolio of software for connected print production. Web-to-print captures customer requirements, ERP/MIS organizes the business, prepress checks the artwork, and RIP software prepares the output. You can focus on a specific handoff and expand the configuration as your needs change.
From the first order to the next operator
Follow a job through production
Explore the information each team needs and where software can support the handoff.
Illustrative print workflow
Capture a complete print order
Give the next team the product specification and artwork they need to begin. A storefront can reduce repeated questions when product choices, file requirements and customer permissions are configured clearly.
What to measure: Look for incomplete orders and time spent re-entering the same information.
Turn the order into a production plan
Establish the material, finishing requirements and route through the shop. Define which business system owns the job record and how updates reach the people preparing and producing it.
What to measure: Compare estimating effort, manual job-ticket updates and time waiting for missing instructions.
Approve the file that will be produced
Check artwork against the agreed product requirements. Keep corrections, exceptions and approval attached to the right version so production can identify the file that is ready to use.
What to measure: Track preparation time, approval delay and rework caused by the wrong file version.
Match output to the device and material
Use the production layout, output profile and device settings appropriate to the job. Confirm how print and finishing instructions are supplied for the selected equipment and software editions.
What to measure: Measure setup effort, material use and output that needs correction or another print pass.
Keep the next operator connected to the job
Make it possible to identify the printed work and retrieve its instructions. Agree which status updates return to the business system, including exceptions that need someone’s attention.
What to measure: Measure time spent finding job details and the completeness of production status updates.
This example is a planning guide. The order of steps, approval rules, licensed modules and system connections depend on your implementation.
The software portfolio
Choose the tools for your print workflow
Start with the task you want to improve. The Open Software Initiative brings together tools for online ordering, print ERP, prepress, RIP processing, PDF editing and job tracking.
Smart Shop + Smart Editor
Order and personalize
Build print-specific online ordering for your customers. Smart Shop handles the storefront; Smart Editor lets buyers personalize configured products in their browser and generate print-ready PDFs.
Illustrative useA customer selects a display size, changes approved artwork fields and submits the order with the required product details.
Templates, product options, storefront connections and output rules are configured for the product range.
Bring estimating, orders, production routing and invoicing into a print-focused cloud ERP. Share job information across customer service and the shop floor.
Illustrative useAn approved order receives a job record, production requirements and a defined route through the shop.
Agree the estimating rules, accounting connections, customer access and status events during implementation.
Check incoming print files, apply configured corrections and manage versions and customer approvals. Prepress teams can use manual preparation or licensed automation suited to recurring jobs.
Illustrative useA file is checked against a product's requirements and the approved version is passed to production.
Automation, approval allowances, integration and optional tools vary by edition.
Prepare output with RIP processing, color management and production layouts. Profiling and color tools support a controlled output process for the selected printer and material.
Illustrative useAn approved job is imposed, processed with the chosen output profile and delivered to its configured printer workflow.
Use a dedicated desktop editor for detailed PDF inspection and last-minute production corrections, including page boxes, objects, separations and dielines.
Illustrative usePrepress corrects a technical detail, checks the result and returns the revised file to its workflow.
Keep file versions and approval requirements clear when a production correction changes the customer's artwork.
Identify a printed job from a captured image and connect it to ERP or prepress information. Operators can retrieve job details and report production status through the configured workflow.
Illustrative useA finishing operator scans a printed piece to locate the matching order and its instructions.
Validate image matching, connected records and capture conditions with representative jobs before rollout.
A working integration needs more than a destination for a PDF. Agree who owns the order, which artwork version is approved and what the next team should receive. Use these questions to define a practical scope.
Integration planning checklist — adapt to the systems in your shop
Connection point
Agree the handoff
Prove it with a job
Order identity
Which system creates the reference used by every department?
Test a new order, a repeat order and a customer change.
Artwork and approval
Which file version is approved, and who may replace it?
Test a correction after approval and a job that must return to review.
Job specification
How do quantity, size, material, finish and due date reach production?
Check the received values on a representative job.
Status and exceptions
Which progress and error messages travel back to the business system?
Test a successful handoff and a failed or incomplete transfer.
Open integration describes the approach to connecting systems. It does not mean open-source licensing or automatic compatibility with every ERP, printer or cutter. Confirm the required API, connector or file format, software version and feedback path. See the supported cutter details for device-specific output requirements.
Start with a measurable pilot
Map the current tools
List the storefront, ERP/MIS, prepress, RIP, printers and cutters, including versions and the data exchanged today.
Choose a representative job
Bring a repeat product, real artwork, an approval example and the exceptions your operators need to handle.
Agree what success means
Measure the current handoff, choose a practical improvement target and include the time spent handling exceptions.
Hear from Durst
The initiative, the portfolio and the partners
These three introductions from Durst Software & Solutions explain the thinking behind Smart Factory and the connected software portfolio.
Select a video to load YouTube. You can also use the direct watch links. Illustrations are topic covers; the videos are published by Durst Software & Solutions.
Print software, explained
The terms behind the workflow
Web-to-print
Online product configuration, artwork submission and print ordering for customers or a private customer portal.
ERP / MIS
Business systems used to manage print estimating, orders, resources, production records and commercial information.
Preflight
Checking a print file against defined technical requirements before production, with issues flagged for correction or review.
RIP
Raster image processing: converting print data into the output information needed by the configured printing system.
API and integration
A defined way for systems to exchange data. Open APIs do not mean open-source software or an included connector for every system.
Production feedback
Agreed progress, completion or exception information returned from a production stage to a connected job record.
Planning your configuration
Durst Smart Factory questions
What is Durst Smart Factory?
It is a modular software portfolio within Durst's Open Software Initiative, connecting areas such as online ordering, business management, prepress and production. A configuration can start with the modules needed for a particular workflow.
The Open Software Initiative is designed for mixed production environments. Confirm the exact printer model, output requirements, driver support and required integrations; a broad portfolio claim is not a device-by-device compatibility guarantee.
What is the difference between Prepare and Produce?
Prepare handles print-file preparation, checks, versions and approvals. Produce handles RIP processing, color management and output preparation. Edition compatibility matters: Durst’s current matrix states that Prepare Starter is not compatible with Produce or Durst Workflow. Confirm the intended connection and editions before selecting a configuration.
Integration is part of the portfolio's design. Start by identifying what the existing system must send and receive, then confirm the available connector, API or file-based route and implementation scope.
Does every subscription include automation and APIs?
No single inclusion rule covers the whole portfolio. Prepare and Produce have different editions and optional capabilities. Use the current feature matrices and a scoped quote to confirm automation, integration, users, approval allowances and device coverage.
Deployment varies by product. Lift ERP is a cloud ERP; PDF Editor is a desktop application. A browser interface does not by itself tell you where processing and data are hosted. Confirm the infrastructure, access, backup and support requirements for the modules in your quote.
Job Tracker provides a concrete example: it uses image recognition to match a printed piece with connected order or prepress information. Evaluate recognition and status handling with your own work rather than assuming every production decision is autonomous.
Does Smart Factory guarantee a specific productivity gain?
Results depend on the starting process, job mix, equipment, data and configuration. Choose a representative pilot and measure the handoff you are changing, including exceptions and rework. Establish targets from your own baseline.
What should I bring to a workflow discussion?
Bring the names and versions of your current systems, your printer and cutter list, a representative job and the steps that delay it. Include the required product details, approval rules and information that each department needs.
Discuss support needs for the equipment in your workflow.
Where does your next job get held up?
Bring your current systems, equipment list and a representative job. Talk with Amcad Graphics about the software and connections that fit the way you produce print.
Product information reviewed October 8, 2026, against Durst’s official portfolio and feature matrices. Workflow examples and pilot questions are practical planning guidance. Confirm current licensing, deployment and integration scope in your quote.