Continuous Visual Lines
The profile format supports clean, uninterrupted perimeter illumination around architectural edges and branded structures.
End Cap Left
Matching finish for the selected Linera color
End Cap Right
Matching finish for the selected Linera color
Architectural and Sign Perimeter Lighting
TMT Linera Border Lighting Profiles
TMT Linera is a 24V linear lighting system designed for architectural outlines, sign borders, canopy accents, retail façades, and other perimeter-lighting applications. Its color-matched profile and end-cap system creates a cleaner finished appearance across illuminated contours.
Input Voltage
0V
Power Consumption
0.00W / Foot
Available Colors
Blue
Why Linera
A Complete Border-Lighting System, Not Just a Light Source
Linera combines a low-voltage illuminated profile with coordinated finishing components. The result is a structured system for outlining buildings, signs, canopies, retail façades, and branded architectural features.
Color-Matched Finishing
Profiles and left and right end caps coordinate by color to create a more intentional completed installation.
24V System Architecture
The 24V design supports planned linear runs while keeping electrical selection separate from traditional 12V sign-module layouts.
Outdoor-Oriented Protection
IP67 protection supports installations exposed to dust and weather when the system is installed according to manufacturer guidance and applicable codes.
Applications
TMT Linera for Canopies, Facades, Borders, and Architectural Contours
Linera is designed for visible perimeter lighting where the illuminated profile becomes part of the building or sign identity. Common uses include fuel station canopies, retail facades, hospitality exteriors, architectural borders, pylons, and custom illuminated structures.
Fuel Station and Canopy Accents
Create continuous perimeter lines around canopy fascia, branded trim, and exterior architectural elements.
Retail and Hospitality Facades
Outline storefronts, restaurants, entertainment venues, and hospitality exteriors with coordinated linear color.
Sign Borders and Architectural Features
Integrate illuminated borders into large signs, pylons, monument signs, wall features, and fabricated structures.
Canopy Perimeter Lighting
Continuous border illumination creates a strong night-time visual line around fuel station canopies.
Branded Architectural Contours
Color-matched perimeter lighting reinforces brand identity across large exterior structures.
Technical Snapshot
Core TMT Linera Planning and Performance Details
The 2025 technical data sheet identifies a 24V DC system using UV-stabilized PMMA profiles, CrystaLens optics, IP67 protection, and ultrasonic-welded Linera LED modules. Confirm final loading and installation details against the current manufacturer document.
Input Voltage24V DC
Power Consumption7W / Meter
Light OutputUp to 1100 lm/m
Ingress ProtectionIP67
Module Power0.5W per module
Maximum Single-Side Run15 m / 49.2 ft
Standard Lengths600, 1200, 2400, and 3000 mm
Cut IntervalEvery 70 mm / 2.755 in
Profile MaterialUV-stabilized PMMA
OpticsCrystaLens light distribution
System Connection3M Scotchlok
Operating Temperature-30 C to +60 C
Rated LifespanMore than 80,000 hours
Warranty5 years
Certifications ListedCE and UL
Profile Dimensions300 mm x 40 mm segments
Accessories and Profile Lengths
Mounting, End Caps, Profile Sizes, and Installation Geometry
Linera is presented as a coordinated system with matching left and right end caps, transparent mounting clips, standard profile lengths, and defined approaches for inside, outside, and stepped corners.
Mounting Clip
The data sheet identifies a UV-stabilized, injection-molded mounting bracket. The installation guide shows clips spaced at approximately 500 mm.
Standard Tube Sizes
Available lengths are 600, 1200, 2400, and 3000 mm. Profiles can be cut at the designated 70 mm module interval.
Step Corners
Left and right step-corner arrangements create clean terminations around returns and stepped facade geometry.
Outside Corners
Plan the cut position and profile alignment so the illuminated line remains visually consistent around an exterior corner.
Inside Corners
Inside-corner geometry requires intentional module placement, cover alignment, and connection planning.
TMT LEDs Product Ecosystem
Continue Through the TMT LED Sign-Lighting System
Linera is one part of a broader product ecosystem that includes LED modules, power supplies, sign cabinet hardware, and retrofit components.
TMT Linera FAQs
TMT Linera Border Lighting Profile Questions
These answers provide a structured starting point for sign shops, installers, fabricators, and project planners evaluating Linera for perimeter-lighting applications.
What is TMT Linera?
TMT Linera is a 24V border-lighting profile system for continuous illuminated outlines on canopies, facades, gas stations, car wash facilities, signs, and architectural contours.
What voltage does TMT Linera use?
The technical data sheet specifies 24V DC input power.
How much power does TMT Linera consume?
The data sheet lists 7 watts per meter, equal to 0.5 watt per LED module. The page also presents the approximate imperial reference of 1.22 watts per foot.
How much light output can Linera provide?
The manufacturer data sheet states output of up to 1100 lumens per meter.
What colors are available?
The listed colors are white, yellow, orange, red, green, and blue. Use the round selector buttons in the hero to preview the profile with the matching left and right end caps.
Are matching left and right end caps available?
Yes. Coordinated left and right end caps are shown for each profile color, supporting a cleaner termination at both ends of the run.
What standard Linera lengths are available?
The product model tables list 600 mm, 1200 mm, 2400 mm, and 3000 mm lengths, which are approximately 23.6, 47.2, 94.5, and 118.1 inches.
Can TMT Linera be cut to a custom length?
Yes. The data sheet states that the profile can be cut at each 70 mm module interval. Cutting should occur between the designated modules.
What is the maximum continuous run from one power-feed side?
The technical data sheet identifies a maximum single-side power-loading length of 15 meters. Its connection diagram shows a 15 meter run drawing approximately 105 watts and 4.37 amps at 24V.
Can one power supply feed a longer total installation?
The connection diagram illustrates one power supply feeding up to 15 meters to the right and 15 meters to the left for a 30 meter total layout. The illustrated total is approximately 210 watts and 8.75 amps. Final loading must be confirmed for the selected supply and field conditions.
What material is used for the Linera tube?
The profile is identified as UV-stabilized PMMA for outdoor use.
What optics are used inside Linera?
The data sheet identifies CrystaLens optics for light distribution and ultrasonic-welded Linera LED modules.
Is TMT Linera suitable for outdoor installations?
The product is listed with IP67 ingress protection, UV-stabilized materials, and an operating-temperature range of -30 C to +60 C. Suitability still depends on correct mounting, connections, sealing, power-supply placement, and applicable codes.
How far apart should mounting clips be installed?
The mounting-clip installation guide shows clips spaced at approximately 500 mm along the profile.
How are the electrical connections made?
The data sheet identifies 3M Scotchlok connections. Its illustrated procedure inserts the conductors without stripping, crimps the blue section fully with pliers, and relies on the internal silicone to surround and protect the connection.
What corner layouts are supported?
The technical guide illustrates step-corner left, step-corner right, outside-corner, and inside-corner layouts for routing the profile around architectural geometry.
What mounting strength is listed?
The technical specifications list mounting-clamp pull force above 20 kg and shear force above 30 kg. These values are product references and do not replace field evaluation of the mounting substrate and installation method.
What lifespan and warranty are listed?
The data sheet lists a rated lifespan above 80,000 hours and a 5-year warranty.
What certifications are identified?
The technical specifications list CE and UL. The data sheet also displays RoHS and other product-marking icons. Confirm the exact certification scope for the ordered product and market.
How should the profile be secured after cutting?
The installation guide instructs installers to clean compressed air and debris from the profile, apply an acrylic-based adhesive to the left or right cover, position the cover, and hold it with masking tape until the adhesive dries.
Where can I find related TMT LED products?
Use the page navigation to continue to the TMT LEDs overview, LED modules, power supplies, and sign cabinet and lightbox products available through Amcad & Graphics.
Project Support
Need Help Planning a TMT Linera System?
Share the application, run lengths, selected color, corner conditions, mounting surface, power-feed locations, and installation environment with the Amcad & Graphics team.
Review the Complete TMT Linera Technical Data
Use the data sheet for product models, standard lengths, 24V loading examples, connection diagrams, mounting guidance, corner layouts, and published technical specifications.
Bookmarks
Bookmarks is empty.
Compare
Shopping cart